======Télécommande ATI REMOTE controlé par LIRC======
=====Détection de la télécommande=====
====lsusb====
lsusb
...
Bus 003 Device 003: ID 0bc7:0004 X10 Wireless Technology, Inc. X10 Receiver
...
====hwinfo --usb====
10: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_bc7_4_noserial_if0
Unique ID: mZxt.qOeD3ZptZSE
Parent ID: uIhY.uKUOxbrVf46
SysFS ID: /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0
SysFS BusID: 3-2:1.0
Hardware Class: unknown
Model: "X10 Wireless USB Receiver"
Hotplug: USB
Vendor: usb 0x0bc7 "X10 Wireless Technology Inc"
Device: usb 0x0004 "USB Receiver"
Revision: "1.00"
Driver: "lirc_atiusb"
Speed: 1.5 Mbps
Module Alias: "usb:v0BC7p0004d0100dc00dsc00dp00icFFisc00ip00"
Driver Info #0:
Driver Status: lirc_atiusb is active
Driver Activation Cmd: "modprobe lirc_atiusb"
Driver Info #1:
Driver Status: ati_remote is active
Driver Activation Cmd: "modprobe ati_remote"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #8 (Hub)
=====RPM=====
Installer le package lirc par Yast ou Apt
=====Compilation=====
**__Compiler si le RPM n'existe pas ou lors d'un bug__**
__Remarque__ : Cette méthode marche a condition de mettre --with-devdir=/dev/lirc
Allez sur http://www.lirc.org/ recuperer le dernier lirc.x.x.x.tar.bz2
====Le Décompresser====
Ouvrez votre Terminal :
tar -xvjf lirc-x.x.x.tar.bz2
__Remarque__ : remplacer linux-2.6.*.* par votre uname -a
====Compilation====
./configure
--with-devdir=/dev/lirc
--with=/usr
--with-driver=atiusb
--with-x
--with-kerneldir=/usr/src/linux-2.6.*.* (facultatif)
--with-moduledir=/lib/modules/2.6.*.*/misc (facultatif)
make
su root
make install
modprobe lirc_atiusb
====Configuration du device====
su root
cd /dev
rm lirc
mkdir lirc
chmod 755 lirc
cd /lirc
chown root:video lircm
chown root:video lircd
====Configuration de udev====
Créer le fichier ou modifier le fichier : /etc/udev/rules.d/10-lirc.rules\\
KERNEL="lirc[0-9]*", NAME="lirc/%n"
====Configuration du Deamon====
Modifier le fichier : /etc/sysconfig/lirc
## Path: Hardware/Lirc
## Description: lirc (infrared remote control) configuration
## Type: string
## Default: "660"
## ServiceRestart: lirc
#
# permissions for /dev/lircd
#
LIRCD_DEV_PERMISSIONS="666"
## Type: string
## Default: "root:video"
#
# owner and group for /dev/lircd
#
LIRCD_DEV_OWNER="root:video"
## Type: string
## Default: ""
#
# use given driver
#
LIRCD_DRIVER=""
## Type: string
## Default: ""
#
# read from given device
# votre--with-devdir
#
LIRCD_DEVICE="/dev/lirc"
## Type: string(lirc_bt829,lirc_gpio,lirc_i2c,lirc_it87,lirc_parallel,lirc_sir,ir-kbd-i2c,ir-kbd-gpio)
## Default: ""
#
# load given lirc driver module
#
LIRC_MODULE="lirc_atiusb"
## Type: string
## Default: ""
#
# listen for network connections on specified port.
# WARNING: don't use this on a machine with an internet
# connection as lircd is running as root!
#
LIRCD_LISTENPORT=""
## Type: string
## Default: ""
#
# connect lircd to specified host
#
LIRCD_CONNECT=""
=====Fichier de configuration /etc/lircd.conf=====
Trouver sa télécommande dans /usr/share/lirc/remotes/atiusb/lircd.conf est la parti le plus difficile pour moi c'est l'usb et non le numéro derriére la télécommande qui la caractérise :\\
\\
Mon lsusb : \\
**Bus 003 Device 003: ID 0bc7:0004 X10 Wireless Technology, Inc. X10 Receiver**\\
\\
Dans le fichier /usr/share/lirc/remotes/atiusb/lircd.conf.atiusb il faut trouver quelque chose de semblabe à ceci :\\
**# P: Vendor=0bc7 ProdID=0004 Rev= 1.00**\\
**# S: Manufacturer=X10 Wireless Technology Inc**\\
\\
Copier la configuration de votre télécommande dans le fichier /etc/lirc.conf comme ci-dessous :\\
linux:/etc # cat lircd.conf
# this config file was automatically generated
# using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004
#
# contributed by Martin Tomasek
#
# brand: ATI Remote Wonder
# model no. of remote control:
# devices being controlled by this remote: ATI USB Receiver (X10).
#
# * remote is set to channel 1, driver reports channel 16. don't know
# which is true.
#
# P: Vendor=0bc7 ProdID=0004 Rev= 1.00
# S: Manufacturer=X10 Wireless Technology Inc
# S: Product=USB Receiver
#
begin remote
name atiusb_ch1
bits 16
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x14
post_data_bits 16
post_data 0x0
gap 227933
toggle_bit 0
begin codes
A 0x000000000000D500
B 0x000000000000D601
C 0x000000000000EE19
D 0x000000000000F01B
E 0x000000000000F621
F 0x000000000000F823
POWER 0x000000000000D702
TV 0x000000000000D803
DVD 0x000000000000D904
WEB 0x000000000000DA05
BOOK 0x000000000000DB06
HAND 0x000000000000DC07
MOUSE_LEFT_BTN 0x0000000000004D78
MOUSE_RIGHT_BTN 0x000000000000517C
MOUSE_LEFT 0x0000000000004570
MOUSE_RIGHT 0x0000000000004671
MOUSE_UP 0x0000000000004772
MOUSE_DOWN 0x0000000000004873
VOL_UP 0x000000000000DD08
VOL_DOWN 0x000000000000DE09
MUTE 0x000000000000DF0A
CH_UP 0x000000000000E00B
CH_DOWN 0x000000000000E10C
1 0x000000000000E20D
2 0x000000000000E30E
3 0x000000000000E40F
4 0x000000000000E510
5 0x000000000000E611
6 0x000000000000E712
7 0x000000000000E813
8 0x000000000000E914
9 0x000000000000EA15
0 0x000000000000EC17
LIST 0x000000000000EB16
CHECK 0x000000000000ED18
UP 0x000000000000EF1A
DOWN 0x000000000000F722
LEFT 0x000000000000F21D
RIGHT 0x000000000000F41F
OK 0x000000000000F31E
TIMER 0x000000000000F11C
MAXIMIZE 0x000000000000F520
REW 0x000000000000F924
FFWD 0x000000000000FB26
PLAY 0x000000000000FA25
STOP 0x000000000000FD28
RECORD 0x000000000000FC27
PAUSE 0x000000000000FE29
end codes
end remote
=====Le deamon LIRC=====
====Mettre le deamon en service pour chaque démarrage ====
chkconfig -add lirc default
====Mettre le deamon en marche ====
cd /etc/init.d/
lircd start
====Vérifier que le deamon est en marche ====
ps x | grep lirc
doit donner quelque chose comme ça
4337 ? Ss 0:00 /usr/local/sbin/lircd
=====Tester que la télécommande fonctionne=====
Lancer dans un console irw et appuyer sur des touches de la télécommande.
Voila ce que ça donne quand ça marche :
linux:/ # irw
00000014f9240000 00 REW atiusb_ch1
00000014fa250000 00 PLAY atiusb_ch1
00000014fa250000 01 PLAY atiusb_ch1
00000014fe290000 00 PAUSE atiusb_ch1
00000014fd280000 00 STOP atiusb_ch1
00000014fe290000 00 PAUSE atiusb_ch1
00000014f7220000 00 DOWN atiusb_ch1
00000014f7220000 01 DOWN atiusb_ch
===== Fichier de raccourcis /etc/lircrc=====
**__Pré requis__** : si vous utlisez les commandes **osdcat** et **reglerson** du fichier de raccourcis
==== Script osdcat /usr/local/bin/osdcat (facultatif)====
#!/bin/bash
ps_osd=$(ps -A | grep osd_cat)
if test -n "$ps_osd" ; then
killall -9 osd_cat 2>&1 >/dev/null
fi
osd_cat --delay=2 -A center -p middle -o 5 -f -adobe-helvetica-bold-r-normal-*-34-*-*-*-*-*-* 2>&1 >/dev/null
chmod +x /usr/local/bin/osdcat
==== Script pour regler le son /usr/local/bin/reglerson (facultatif)====
[[5.1_soundblaster_live#script_pour_regler_le_son]]
==== Fichier de raccourcis /etc/lircrc ====
Correspond a mon fichier pour télécommander Amarok, Mplayer et Kaffeine, la radio, le son, une chaine d'info
#osd
begin
prog = irexec
button = PLAY
config = echo "PLAY" | osdcat
end
begin
prog = irexec
button = DVD
config = echo "DVD" | osdcat
end
begin
prog = irexec
button = PAUSE
config = echo "PAUSE" | osdcat
end
begin
prog = irexec
button = STOP
config = echo "STOP" | osdcat
end
begin
prog = irexec
button = FFWD
config = echo ">>" | osdcat
end
begin
prog = irexec
button = REW
config = echo "<<" | osdcat
end
begin
prog = irexec
button = RIGHT
config = echo "PISTE SUIVANTE" | osdcat
end
begin
prog = irexec
button = LEFT
config = echo "PISTE PRECEDENTE" | osdcat
end
begin
prog = irexec
button = MUTE
config = echo "MUTE" | osdcat
end
#amarok
begin
prog = irexec
button = A
config = amarok
end
begin
prog = irexec
button = PLAY
config = dcop amarok player play
end
begin
prog = irexec
button = PAUSE
config = dcop amarok player pause
end
begin
prog = irexec
button = STOP
config = dcop amarok player stop
end
begin
prog = irexec
button = FFWD
config = dcop amarok player seekRelative 15
end
begin
prog = irexec
button = REW
config = dcop amarok player seekRelative -5
end
begin
prog = irexec
button = RIGHT
config = dcop amarok player next
end
begin
prog = irexec
button = LEFT
config = dcop amarok player prev
end
begin
prog = irexec
button = VOL_UP
config = dcop amarok player volumeUp
end
begin
prog = irexec
button = MUTE
config = dcop amarok player mute
end
begin
prog = irexec
button = VOL_DOWN
config = dcop amarok player volumeDown
end
begin
prog = irexec
button = LIST
config = dcop amarok playlist togglePlaylist
end
begin
prog = irexec
button = CHECK
config = toggleRandomAmarok
end
begin
prog = irexec
button = MAXIMIZE
config = dcop amarok player showOSD
end
begin
prog = irexec
button = A
button = POWER
config = dcop amarok MainApplication-Interface quit && echo "QUITTER AMAROK" | osdcat
end
# tv
begin
prog = irexec
button = TV
config = mplayer-bin -af volume=-20 http://vipmms9.yacast.net/bfm_bfmtv &
end
#radio
begin
prog = irexec
button = 1
config = gmplayer -af volume=-20 http://ogg.tv-radio.fr:1441/encoderfinter.ogg &
end
begin
prog = irexec
button = 1
config = echo "France inter" | osdcat
end
begin
prog = irexec
button = 2
config = gmplayer -af volume=-20 mms://vip2.yacast.fr/encoderrtl &
end
begin
prog = irexec
button = 2
config = echo "RTL" | osdcat &
end
begin
prog = irexec
button = 3
config = gmplayer -af volume=-20 mms://vip8.yacast.fr/encodereurope1 &
end
begin
prog = irexec
button = 3
config = echo "Europe 1" | osdcat &
end
#kaffeine
begin
prog = irexec
button = B
config = kaffeine
end
begin
prog = irexec
button = DVD
config = dcop kaffeine KaffeineIface playDVD
end
begin
prog = irexec
button = PLAY
config = dcop kaffeine KaffeineIface play
end
begin
prog = irexec
button = PAUSE
config = dcop kaffeine KaffeineIface pause
end
begin
prog = irexec
button = STOP
config = dcop kaffeine KaffeineIface stop
end
begin
prog = irexec
button = FFWD
config = dcop kaffeine KaffeineIface posPlus
end
begin
prog = irexec
button = REW
config = dcop kaffeine KaffeineIface posMinus
end
begin
prog = irexec
button = RIGHT
config = dcop kaffeine KaffeineIface next
end
begin
prog = irexec
button = LEFT
config = dcop kaffeine KaffeineIface previous
end
begin
prog = irexec
button = B
button = POWER
config = dcop kaffeine KaffeineIface quit && echo "QUITTER KAFFEINE" | osdcat
end
begin
prog = irexec
button = VOL_UP
config = dcop kaffeine KaffeineIface volUp
end
begin
prog = irexec
button = MUTE
config = dcop kaffeine KaffeineIface mute
end
begin
prog = irexec
button = VOL_DOWN
config = dcop kaffeine KaffeineIface volDown
end
begin
prog = irexec
button = MAXIMIZE
config = dcop kaffeine KaffeineIface fullscreen
end
begin
prog = irexec
button = UP
config = dcop kaffeine KaffeinePartIface zoomIn
end
begin
prog = irexec
button = DOWN
config = dcop kaffeine KaffeinePartIface zoomOut
end
#SON
begin
prog = irexec
button = CH_UP
config = reglerson + 10
end
begin
prog = irexec
button = CH_DOWN
config = reglerson - 10
end
begin
prog = irexec
button = E
config = reglerson 0
end
begin
prog = irexec
button = D
config = reglerson = 70
end
### MPlayer lirc setup
# Show OSD
begin
prog = mplayer
button = BOOK
repeat = 0
config = osd
end
begin
prog = mplayer
button = CHECK
repeat = 0
config = vo_ontop
end
# Pause playback
begin
prog = mplayer
button = PAUSE
repeat = 0
config = pause
end
# Skip ahead a minute if playing
# If paused, resume playing
begin
prog = mplayer
button = PLAY
repeat = 0
config = seek +1
end
# Stop playback and exit
begin
prog = mplayer
button = STOP
repeat = 0
config = quit
end
# Mute
begin
prog = mplayer
button = MUTE
repeat = 3
config = mute
end
# Seek back 10 seconds
begin
prog = mplayer
button = REW
repeat = 0
config = seek -10
end
# Seek forward 30 seconds
begin
prog = mplayer
button = FFWD
repeat = 0
config = seek +30
end
# Quit
begin
prog = mplayer
button = C
button = POWER
repeat = 0
config = quit && echo "QUITTER MPLAYER" | osdcat
end
begin
prog = irexec
button = C
button = POWER
repeat = 0
config = killall mplayer-bin && echo "QUITTER MPLAYER" | osdcat
end
# Seek forward 10 minutes
begin
prog = mplayer
button = RIGHT
repeat = 0
config = seek +600
end
# Seek backward 10 minutes
begin
prog = mplayer
button = LEFT
repeat = 0
config = seek -600
end
# Toggle full-screen
begin
prog = mplayer
button = MAXIMIZE
repeat = 0
config = vo_fullscreen
end
begin
button = VOL_UP
prog = mplayer
config = volume 1
repeat = 1
end
begin
button = VOL_DOWN
prog = mplayer
config = volume -1
repeat = 1
end
=====Pour KDE=====
Permet de lancer au démarrage\\
Créer un fichier /home/mickael/.kde/Autostart/ir \\
chmod +x ir\\
#!/bin/bash
killall irexec
irexec -d /etc/lircrc
=====Débugage=====
cat /var/log/messages | grep lirc
Chargement des modules
Mar 3 18:45:27 localhost lirc_dev: IR Remote Control driver registered, at major 61
Mar 3 18:45:27 localhost lirc_atiusb: no version for "lirc_unregister_plugin" found: kernel tainted.
Mar 3 18:45:27 localhost lirc_atiusb: USB remote driver for LIRC v0.5
Mar 3 18:45:27 localhost lirc_atiusb: Paul Miller
Mar 3 18:45:27 localhost lirc_dev: lirc_register_plugin: sample_rate: 0
Mar 3 18:45:27 localhost lirc_atiusb[3]: X10 Wireless Technology Inc USB Receiver on usb3:3
Mar 3 18:45:27 localhost usbcore: registered new driver lirc_atiusb
Mise en route du deamon
Mar 3 18:45:35 localhost lircd-0.8.0[10909]: lircd(atiusb) ready
Mar 3 18:46:11 localhost lircd-0.8.0[10909]: accepted new client on /dev/lirc/lircd
Mar 3 18:46:16 localhost lircd-0.8.0[10909]: removed client
micke_suse :)